How can I communicate with my dehydrator?

The NETCOM dehydrator can communicate via Ethernet, RS422, and RS232. The Ethernet interface provides the best communications and control of the dehydrator by providing a web based interface. Through this interface, you can monitor the system,...

read more

Can I link two dehydrators together?

By default, a NETCOM is set as a slave so that it will accept commands from any other NETCOM dehydrators that has been configured as a master.

read more

My NETCOM keeps turning on and off the compressor, what is going on?

Short cycling of the compressor may be caused by a leak in the pressure system. It could be a leak in the waveguide system, in the dehydrator or in the interconnecting tubing.

read more

I occasionally get a high pressure alarm

A high pressure alarm can sometimes occur due to solar gain which is where a portion of the waveguide is exposed to direct sunlight during the heat of the day. The air inside the waveguide expands as it gets hotter causing a rise in pressure.

read more

I have a low pressure alarm what is the problem?

There are numerous possibilities for a low pressure alarm, to narrow the search consider your system as three parts: The waveguide, the dehydrator, and the interconnecting tubing. Isolating the dehydrator from the other two parts will determine if...

read more

Will the Smart Manifold monitor moisture?

by David Mays | Jul 26, 2017 |

ASM-1 FAQs, dehydrator, Manifold, moisture, pressure

|
0 Comments

No. The Smart Manifold monitors the pressure from each dehydrator and directs it to the appropriate port. Each of the dehydrators is responsible for monitoring its own moisture levels and dealing with it accordingly.

read more

NETCOM red alarm LED is on, how do I find out what is happening and how do I correct it?

Establish communications with the NETCOM dehydrator through the Ethernet interface (default IP address from the factory is 192.168.52.9). The default page is the status page and here you will see the alarm/s associated with the alarm LED in the...

read more

Air Dehydrator Connection to Earth Station Waveguide

A technical director from Dubai wants an ETI waveguide air dehydrator for a project in UAE. He asks, "Can you please show how to connect [an ETI Air Dehydrator] with waveguide?"

read more

Innovative EDH-5 Air Dehydrator Ships

Identifying a transformative shift in global telecommunication needs, Environmental Technology Inc. shipped its new EDH-5 Air Dehydrator for antenna waveguide conditioning, serial number 00001.

read more

You CAN Set ADH NETCOM Communications!

The ADH NETCOM is a powerful piece of equipment for one specific, important task: creating the optimum antenna waveguide environment. That’s why you have and use the automatic air dehydrator. You like its Ethernet communication capabilities, that...

read more