How can I communicate with my dehydrator?

The NETCOM dehydrator can communicate via Ethernet, RS422, and RS232. The Ethernet interface provides the best communications and control of the dehydrator by providing a web based interface. Through this interface, you can monitor the system,...

read more

Can I change the IP address ?

Yes, Establish communications with the dehydrator through the Ethernet interface (default IP address from the factory is 192.168.52.9) and navigate to the configuration page. Here you can change the IP address by either allowing the unit to “obtain...

read more

Can I link two dehydrators together?

By default, a NETCOM is set as a slave so that it will accept commands from any other NETCOM dehydrators that has been configured as a master.

read more

How can I communicate with my ASM-1 Smart Manifold?

The ASM-1 Smart Manifold can communicate via Ethernet, RS422 and RS232. The Ethernet interface provides the best communications and control of the dehydrator by providing a web based interface. Through this interface, you can monitor the system,...

read more

How do I setup my ASM-1 Smart Manifold?

The setup of the ASM-1 smart manifold can be done with the following steps:

read more

Can I hook up an older ADH-2ACom or ADH-3Com to the Smart Manifold?

by David Mays | Jul 26, 2017 |

ASM-1 FAQs, IP address, Manifold, output, smart manifold

|
0 Comments

Yes, but then you will need to set the unit's port as an input with no IP address. The Smart Manifold will monitor it but will have no control over ADH-2ACom or ADH-3Com other than to be able to open and shut its output through the manifold.

read more

NETCOM red alarm LED is on, how do I find out what is happening and how do I correct it?

Establish communications with the NETCOM dehydrator through the Ethernet interface (default IP address from the factory is 192.168.52.9). The default page is the status page and here you will see the alarm/s associated with the alarm LED in the...

read more

You CAN Set ADH NETCOM Communications!

The ADH NETCOM is a powerful piece of equipment for one specific, important task: creating the optimum antenna waveguide environment. That’s why you have and use the automatic air dehydrator. You like its Ethernet communication capabilities, that...

read more

ADH NETCOM Pressure Reporting, Lost Communication Fix

read more