Heat Trace with Plastic Pipes

by Joe Hektor | Mar 07, 2018 |

Control, Featured, pipe

|
0 Comments

Heat Trace with Plastic Pipes

read more

Where do I connect the sensor wires to?

The sensor wires are connected to the blue #18 awg wires in the low voltage section. The sensor is not polarized so it does not matter which sensor wire goes to which blue wire.

read more

Where should the temperature sensor be located?

Ideally, the temperature sensor should be located on the pipe on the opposite side from the heater. If this is not possible the sensor can be used as an ambient temperature sensor although it will be less efficient.

read more